November 16, 2026 — ClarkDietrich, North America’s largest manufacturer of cold-formed steel framing (CFS) products and a Steel Framing Industry Association (SFIA) member, has significantly expanded the tested performance of its BlazeFrame® head-of-wall fire and smoke containment system. The system now carries a UL 2079 Fifth Edition listing for up to 3″ of total joint movement. The expanded movement capacity gives designers greater flexibility in specifying fire-rated wall assemblies for buildings with higher structural deflection.

ClarkDietrich’s BlazeFrame® head-of-wall fire and smoke containment system now carries a UL 2079 Fifth Edition listing for up to 3″ of total joint movement.
“As buildings codes change and designs increasingly account for higher deflection, firestop deflection track systems must keep pace,” said Ryan Reed, category manager for ClarkDietrich. “The expanded 3-inch movement rating allows BlazeFrame to serve a wider range of building types and joint conditions.”
The increased movement capability comes alongside a new firestop option. Mineral wool installed in the stud cavity offers an alternative to the BlazeFrame Perimeter L-Bead. Movement capacity beyond 1 inch is achieved exclusively with the mineral wool configuration.
The expanded testing builds on BlazeFrame’s proven intumescent technology. ClarkDietrich manufactures each profile with a 2-mm cured intumescent strip that adheres directly to the steel. When exposed to temperatures above 375°F, the material expands up to 35 times its original size, providing protection from heat and flame passage during a fire event. Tested assemblies continue to achieve air/smoke leakage (L-ratings) well below the code-defined maximum, and the system remains UL 2079 Fifth Edition listed.
ClarkDietrich also offers BlazeFrame’s intumescent material separately in roll form. BlazeFrame Tape is available for overnight delivery through ClarkDietrich Clip Express™. The service provides clips, connectors, supports and other hardware for commercial and residential CFS framing applications.
Learn more about the full BlazeFrame product family.
ClarkDietrich® is the leading manufacturer of a full line of drywall studs and accessories, structural studs and joists, metal lath and accessories, shaft wall studs and track, interior and exterior finishing products, and connectors and accessories for commercial and residential construction. Quality manufacturing, a full-line offering, national distribution, engineering services and responsive customer service position ClarkDietrich as the largest manufacturer of cold-formed steel framing in North America. Clarkwestern Dietrich Building Systems is a 75/25 joint venture with Marubeni-Itochu Steel America Inc. (MISA) and Worthington Enterprises, Inc. Visit clarkdietrich.com.
About ClarkDietrich
Additional Resources
- ClarkDietrich Introduces ASTM F2322 Impact Tested Barrier Mesh Wall Systems
- ClarkDietrich Launches Industry-First Embodied Carbon Calculator for Cold-Formed Steel
- ClarkDietrich Cuts Emissions to Help Builders Procure Lower-Carbon Products
